Informing on Best Practices Using Design Builder and RET Screen to Calculate Energetic, Financial, and Environmental Impacts of Energy Systems for Buildings
Abstract
Buildings represent 32% of total final energy consumption. In terms of primary energy consumption, buildings represent around 40% in most IEA countries (International Energy Agency). For such reason, strategies that lead to energy savings and greenhouse gases reduction are needed.
This research aims to provide a methodology able to identify the best system configuration from a technical, economic and environmental point of view by using at the same time two energy software: Design builder, which is able to calculate buildings energy needs under dynamic conditions, and RETScreen, which allows feasibility analysis of clean energy projects.
In order to assess the effectiveness of this operating procedure, a historical building has been modelled and a Combined Cooling, Heat and Power system based on an internal combustion engine has been chosen to ensure environmentally sound way.
In this study it shows the application of the procedure to a case study as an historical building located in Orte City which is near Rome in Italy; the methodology could get a real preliminary analysis for choose the best active or passive system for improve the energy efficiency and environmental sustainability of existing buildings, also allowing a cost-benefit analysis useful for the concrete realization of the interventions studied.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright & License
All Research Plus Journals (RPJ) publish open access articles under the terms of the Creative Commons Attribution (CC BY-SA 4.0) https://creativecommons.org/licenses/by-sa/4.0/ License which permits use, distribution and reproduction in any medium, provided the original work is properly cited & ShareAlike terms followed.
Copyright on any research article in a journal published by a RPJ is retained by the author(s). Authors grant RPJ a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to RPJ either via RPJ journal portal or other channel to publish their research work in RPJ agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by RPJ.
3rd party copyright
It is the responsibility of author(s) to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.
Disclaimer
Research Plus Journals Open Access articles posted to repositories or websites are without warranty from RPJ of any kind, either express or implied, including, but not limited to, warranties of merchantability, fitness for a particular purpose, or non-infringement. To the fullest extent permitted by law RPJ disclaims all liability for any loss or damage arising out of, or in connection, with the use of or inability to use the content.
